Rogers PORON 4701-40 Polyurethane Nsuo a Wɔde Yɛ Nneɛma|Soft High-Bounce Mfutuma-Adanse Nsɔano Gasket Nneɛma - Nokware Rogers - STK
STK Genuine Rogers PORON 4701-40 yɛ adwuma a ɛkorɔn-a ɛyɛ mmerɛw, a ɛyɛ mmerɛw a ɛwɔ afã abien microcellular polyurethane foam. Mframa nkwammoaa nketenkete ɔpepem pii a wɔatoto mu denneennen a ɛyɛ adwuma te sɛ nsuten nketenkete a wontumi nsɛe no ahyɛ mu ma.
Nea ɛnte sɛ nneɛma a wɔde kyekyere nneɛma a ne bo nyɛ den a ɛyɛ petee na ɛpaapae wɔ adapɛn kakraa bi akyi no, wɔayɛ PORON 4701-40 sɛnea ɛbɛyɛ a ɛbɛkata so bere tenten na abɔ ho ban afi ahodwiriw ho. Ɛkɔ so yɛ nea ɛyɛ mmerɛw, ɛpia kɔ akyi denam mmoa a ɛfata pɛpɛɛpɛ so, na ɛma ɛyɛ akwanside a edi mũ, a ɛtra hɔ nkwa nna nyinaa a ɛko tia mfutuma, wosow, ne nsu a ɛyɛ hare a ɛwɔ ɛlɛtrɔnik mfiri ne anyinam ahoɔden mfiri mu.
Yɛn Fresh Stock Bɔhyɛ :Ɛsɛ sɛ wɔma polyurethane foams yɛ foforo na ama wɔakura wɔn bounce-back tumi a ɛyɛ nwonwa no mu. Yɛde Rogers PORON 4701-40 nnua a edi kan no nyinaa sie yɛn ɔhyew-ahyɛ so, adekoradan a ɛho tew mu. Yɛhyɛ bɔ sɛ 100% nokware brand lineage a enni dried-out anaasɛ aged stock.
Mfaso a mfaso wɔ so
Sɛ woreyɛ abɔnten anyinam ahoɔden nnaka, mfiri a wɔde nsa yɛ, anaa kar a wɔde kyerɛ nneɛma ho mfonini a, foam a ɛyɛ mmerɛw bɛma mfutuma asɛe wo amansin no. Nea enti a PORON 4701-40 yɛ nea ɛfata a wobetumi apaw ni:
Ɛntena hɔ tratraa da (Amazing Bounce-Akyi):Eyi ne ne tumi kɛse a ɛsen biara. Sɛ mpo womia saa ahurututu yi mu wɔ ɔpon anaa nnua a wɔato mu denneennen mu mfe pii a, ɛbɛsan abɔ ne mu duru a na ɛwɔ hɔ mfiase no bere a wubue no, na ama woahwɛ ahu sɛ nsɔano no rensɛe da.
Blocks 100% Mfutuma & Mframa a Ɛyɛ Nwini:Ɛyɛ ɔfasu a mframa ntumi nkɔ mu. Sɛ wɔmia no kakra a, ɛtwetwe kɔ dade anaa plastic a ɛnyɛ pɛpɛɛpɛ mu pɛpɛɛpɛ, na ɛma mfutuma pa, efĩ, ne mframa a ɛyɛ nwini no kɔ so tra w’afiri a ɛyɛ mmerɛw no akyi koraa.
No Crumbling anaasɛ Powdering:Foam a ne bo nyɛ den porɔw na ɛdan powder a ɛyɛ nnam a ɛyɛ ahometew wɔ bere bi akyi, na ɛsɛe w’aniwa anaa wo screens. PORON 4701-40 ho tew ma ɛyɛ nwonwa, ɛyɛ den, na bere kɔ so no, ɛrentutu anaasɛ ɛrentetew.
Ahobammɔ Screens a efi Drops ho:Ɛtwe nsunsuanso ahorow no fɛfɛɛfɛ. Sɛ afiri bi hwe ase anaasɛ mfiri bi wosow bere nyinaa a, foam matrix a ɛyɛ mmerɛw no kyere wosow no, na ɛmma ahwehwɛ a wɔde kyerɛ ne mfoninitwa mfiri module ahorow no ntumi mpaapae.
TDS
|
AGYAPADEƐ |
AKWAN A WƆFA SO YƐ SƆHWƐ |
BOƆ |
|
ANISOƆ |
||
|
Nneɛma a ɛyɛ den, kg /m3 (lb. / ft3) . |
ASTM D3574-95, Sɔhwɛ A |
240 (15) |
|
Nsosɔsoɔ, % |
± 10 |
|
|
Ne kɛse, mm |
1.4 – 3.0 |
|
|
Nsosɔsoɔ, % |
± 10 |
|
|
Kɔla a Wɔde Di Dwuma (Code) . |
Abibifo (04) . |
|
|
Nhyɛso Tumi a Wɔdannan, . |
0.51 cm/simma (0.2 "/simma). Nhyɛso a wɔde hyɛ mu |
27 – 55 (4.0 - 8.0) |
|
KPa (psi) a wɔtaa de di dwuma . |
Ahoɔden a Wɔsusu @ 20% Deflection |
40.6 (5.9) |
|
Ahoɔden a Wɔsusuu @ 25% Deflection |
44.5 (6.5) |
|
|
Ahoɔden a Wɔsusuu @ 30% Deflection |
49.1 (7.1) |
|
|
Ahoɔden a Wɔsusuu @ 40% Deflection |
60.8 (8.8) |
|
|
Ahoɔden a Wɔsusuu @ 50% Deflection |
81.5 (11.8) |
|
|
Ahoɔden a Wɔsusuu @ 60% Deflection |
127 (18.5) |
|
|
Ahoɔden a Wɔsusuu @ 70% Deflection |
264 (38.4) |
|
|
Nneɛma a ɛyɛ den, Durometer, Mpoano O |
ASTM D2240-97 na ɛwɔ hɔ |
12 |
|
Mpoano A. A. |
8 |
|
|
Nhyɛso Set, % max. |
ASTM D3574-95 Sɔhwɛ D @ 23 digrii (73 digrii F) . |
5 |
|
ASTM D3574-95 Sɔhwɛ D @ 70 digrii (158 digrii F) . |
10 |
|
|
ASTM D3574-95 Sɔhwɛ J/Sɔhwɛ D |
5 |
|
|
Nsusuwii mu Gyinabea, % max. sesa |
22 hrs @ 80℃(176℃F) wɔ Forced-Mframa Fononoo mu |
± 1 |
|
Tensile Ahoɔden, min. kPa, (psi) . |
ASTM D3574-75 Sɔhwɛ E |
276 (40) |
|
Tensile Ntrɛwmu, % min., . |
ASTM D3574-75 Sɔhwɛ E |
100 |
|
Nsuo Ahoɔden, kN/m (pli) min |
ASTM D264-91 Ɔwufoɔ C |
0.5 (3) |
|
ELECTRICAL NE AHYƐDEƐ A ƐYƐ AHYƐDEƐ |
||
|
Dielectric Nkɔso, K' ("DK") . |
ASTM D150 Nsusuwii a ɛwɔ digrii 22 (digrii F 72) . |
1.71 |
|
Dielectric Ahoɔden, kN/m (volts/mil) . |
ASTM D149-97a na ɛwɔ hɔ |
1969 (50) |
|
Nneɛma a Ɛma Ɛpopa, tan D ("DF") . |
ASTM D150-98 na ɛwɔ hɔ |
0.05 |
|
Nnyigyei a Ɛko Tia, ohm-cm (ohm-in) . |
ASTM D257-99 na ɛwɔ hɔ |
1 x 10¹² |
Abisadeɛ:
Ɛlektrɔnik Nneɛma a Wɔde Nsa Yɛ:Mfutuma ne ahodwiriw-absorption gasket a ɛbɔ ho ban a ɛtwa smartphones a ɛyɛ den, aduruyɛ tablets, ne barcodes scanners screens ho hyia.
Kar Screen & Dash Pads: Ɔde ne nsa kyerɛɛ ne so.Sɛ wɔkata ɔkwan a ɛda kar kwankyerɛ nneɛma a ɛkɔ akyiri akyi no ano na ama wɔagyae nteɛteɛm ne nnyigyei a ɛyɛ yaw.
Electrical Control Box Ɔpon Gaskets:Mfiridwuma mu control switchgears ne abɔnten battery cabinets apon mu a wɔbɛkata so na ama osutɔ nsu ne mfutuma ankɔ mu.
Acoustic & Akasafo Nneɛma a Wɔde Tew Wɔn Ho:Akasam nketewa ne afiri a wɔde kasa a wɔde bɛkyekyere wɔ mfiri a nyansa wom mu de asiw nnyigyei a ɛretu ne mframa dede ano.
STK Adwumayɛbea Nnwuma
STK yɛ mfiridwuma mu nneɛma adwumayɛbea converter tẽẽ. Yɛde PORON 4701-40 ma wɔ ɔkwan pɔtee a wo production line hia so:
Tape Lamination (Pre-Glue a Wɔde Di Dwuma):Original PORON foam no nni gluu. Yebetumi de laminate high-grade 3M anaa TESA double-sided tapes wɔ foam backing a ɛwɔ yɛn cleanroom mu no so sɛnea ɛbɛyɛ a ebedu hɔ a ayɛ krado sɛ ɛbɛpepa-na-abata ho.
High-Ahoɔhare Pɛpɛɛpɛ Die-Twa:So wuhia nnua nketenkete a ɛyɛ tokuru, nhama a ɛyɛ tratraa, anaasɛ nneɛma a wɔde horo nneɛma a ɛyɛ kurukuruwa a ɛyɛ den? Yɛde CNC stamping mfiri a ɛyɛ adwuma ankasa di dwuma de twitwa foam no ma ɛyɛ wo blueprint nsusuwii pɛpɛɛpɛ denam laser-n ano a ano yɛ nnam so.
Direct Wholesale Tier Bo a Wɔbɔ:Twitwa mpɔtam hɔ aguadi ho markups a ɛho nhia. Yɛde direct container-ready tiered wholesale quotes ma na ama wo manufacturing bill of materials (BOM) akɔ so ayɛ akansi kɛse.
Akadeɛ
Tags a ɛyɛ hyew .: poron 4701-40 pu foam|anyinam ahoɔden insulation & cushioning nneɛma|adwumayɛ a ɛkorɔn a ɛtwetwe ahodwiriw foam, China poron 4701-40 pu foam|anyinam ahoɔden insulation & cushioning nneɛma|adwumayɛ a ɛkorɔn shock absorbing foam manufacturers, suppliers, adwumayɛbea
