Genuine tesa 4962 Mmienu-Afã a Ɛnyɛ-Teyp a Wɔanwene|Heavy-Mass High-Tack Acrylic Teapɔn - STK
STK de Genuine tesa 4962 Double-Sided Tape, a ɛyɛ premium industrial-grade 160μm (6.3-mil) heavy-mass non-woven tissue tape a wɔayɛ no titiriw ama critical high-tack heavy-mass substrate lamination ne textured surface bonding ma. Ɛda adi sɛ ɛyɛ soronko a ɛyɛ den, high-tack modified acrylic adhesive system deeply impregnated into a highly conformable non-woven carrier, tesa 4962 bridges interface no wɔ nneɛma a ɛyɛ den, ɛnyɛ pɛpɛɛpɛ, na ɛba fam a ɛwɔ soro (LSE) nneɛma a standard thin tapes nya contact kɔm.
Mfiridwuma ano a ɛkyerɛkyerɛ tesa 4962 mu ne ne heavy coating weight wet-out tumi. Ɛdenam acrylic polymer a ano yɛ den a ɛkɔ soro a wɔde di dwuma wɔ mita ahinanan biara mu so no, ade a wɔde nkata so no yɛ adwuma sɛ nsu a wɔde hwɛ ade ketewaa bi wɔ nhyɛso ase. Ɛsen kɔ micro-cavities a ɛwɔ nnua a ɛwɔ abon, fibrous acoustic felts, ne textured interior trim components no mu yiye, na ɛde mfiri a enni ahoɔden a ɛdannan heterogeneous interfaces a wontumi mfa ho nto so no ma ɛbɛyɛ daa structure joints.
Su
Wɔ kar trim nhyiam so ahwɛfo, high-volume foam fabricators, ne mfiridwuma leather laminating specialists, tesa 4962 de zero- huammɔdi bond line a eyi post{3}}assembly lifting fi hɔ koraa ma:
• Heavy Coating Mu duru Wet-Afi adi:
Wɔde acrylic a ɛyɛ basabasa, a ɛyɛ den a wɔayɛ sɛ ɛbɛma nsuo a emu dɔ -afi mu na ahyɛ profiles a ɛwɔ porous, fibrous, anaa textured kɛseɛ ahyɛ mu ma. Ɛma nokware microscopic surface contact area no yɛ kɛse ntɛm ara bere a wɔde di dwuma no.
• Fierce Mfitiase Edge-Grab:
Ɛde ntɛm ara, high-tack mfiridwuma bond si hɔ bere a wɔde ne nsa ka no. Ɛyi edge-lifting ne spring-back delamination fi hɔ koraa wɔ injection molded plastics a ɛyɛ warped anaa stressed kɛse so.
• Multi-Nneɛma a ɛwɔ Mfinimfini Nkitahodi:
Flawlessly bridges heterogeneous bonds between low-density open-cell foams, acoustic felt ntama, aboa nhoma a emu yɛ duru a wɔapaapae, ne ABS anaa polypropylene (PP) dashboards a ɛyɛ den.
• Ɔhyew & Onyin a ɛko tia a ɛkyɛn so:
Cross{0}}linked acrylic formulation titiriw no gyina ɔsɛe a efi nneɛma a atwa yɛn ho ahyia mu ɔhyew kyinhyia mu kosi bere tiaa -bere tiaa mu peaks a +200℃(+392℃F), kura shear resistance a ɛkorɔn mu wɔ a wɔato mu, owia{4}}baked kar dan mu.
TDS
Nneɛma a Wɔyɛ
| Adhesive Type a Wɔde Yɛ Nneɛma | acrylic a wɔde tackified ayɛ |
|---|---|
| Nsɛm a wɔde gyina akyi | ɛnyɛ-wɔnwene |
| Ahosuo | a ɛyɛ translucent |
| Kɔla a wɔde yɛ liner | dodoeɛ |
| Liner Ɔkwan a Wɔfa so Yɛ | krataa |
| Nsuo a ɛwɔ liner no mu duru | 2.72 ɔpepem na ɛwɔ hɔ 69 µm |
| Ne nyinaa mu duru | 160 µm |
| Nneɛma a ɛwɔ liner no mu duru | 113.79 lbs/wɔ 2 mu 80 g/m² |
Agyapadeɛ / Adwumayɛ mu Nkonimdie
| Elongation wɔ ahomegye bere mu | 3 % |
|---|---|
| Ahoɔden a wɔde twetwe nneɛma | 8 N/cm na ɛyɛ |
| Onyin a wɔko tia (UV) . | ɛyɛ pa ara |
| Tack | ɛyɛ pa ara |
| Ɔhyew a ɛko tia bere tiaa bi | 392 digrii F 200 digrii |
| Static shear a ɛko tia wɔ 23 degree | papa |
| Ɔhyew a ɛko tia min. | -40 digrii F -40 digrii |
| Fogging a ɛyɛ hu | papa |
| Nsuo a ɛyɛ nwini a ɛko tia | ɛyɛ pa ara |
| Nnuru a Ɛko Tia | papa |
| Static shear a ɛko tia wɔ 40 degree | kwan |
| Ɔhyew a ɛko tia bere tenten | 176 digrii F 80 digrii |
Nnwuma a Wɔde Di Dwuma
Kar Mfinimfini Trim & Headlining:Wɔde acoustic insulating felts, ntama a ɛwɔ soro, aboa nhoma pon-panel inserts, ne plastic brackets a ɛyɛ den a wɔde si akwantufo kar ne lɔre akɛse mu.
Heavy-Duty Foam & Gasket Nneɛma a Wɔde Yɛ:Daa a wɔde kata dade a wɔabɔ ho ban anaa plastic mfiri adan so.
Premium Leather Nneɛma & Ntama Composite:Pre-gyinabea ne daa structure bonding a emu yɛ duru a apaapae leathers, synthetic ntama, ne afɛfɛde ntama bere a high-end furniture ne nneɛma a wɔyɛ.
Point-of-Atɔ (POP) Nkyerɛkyerɛmu Nhyiam ahorow:Nneɛma a emu yɛ duru a wɔde krataa ayɛ a wɔde nhama ayɛ, plastic afã horow a wɔayɛ no nwene a wɔde kyerɛ nneɛma, ne nnua a wɔakyerɛw so a wɔde hyɛ nneɛma ho nkuran a wɔde bɛbɔ ho ban wɔ baabi a ɛho hia sɛ wɔde ahoɔden a ɛkura mu ntɛm ara.
STK Amanneɛbɔ Tumi a Wɔde Ma: Pɛpɛɛpɛ Amanneɛbɔ Slitting & High-Volume Log Nkyekyɛmu
Teyp a emu yɛ duru-mass non-woven tape a wobɛyɛ ho adwuma no hwehwɛ sɛ wɔde mfiri a ɛkɔ anim a wɔde dannan nneɛma na asiw adhesive squeeze-fi adi na ahwɛ ahu sɛ roll edges no yɛ crisp pɛpɛɛpɛ. STK tẽẽ optimizes wo manufacturing pipeline:
Micro-Pɛpɛɛpɛ Roll Slitting
Esiane sɛ tesa 4962 wɔ adhesive coat a ɛkorɔn-mass nti, slitting a enye betumi ama edge-oozing a emu yɛ den na roll blocking aba. STK de chilled-blade lathe slitters soronko di dwuma de dan master logs ma ɛyɛ teateaa anaa trɛw pɛpɛɛpɛ (sɛ nhwɛso no, 12mm, 19mm, 25mm, 50mm) a mfomso biara nni ho a ɛyɛ tẽẽ roll faces.
Amanneɛbɔ Die-Twa Component Gaskets
tilizing yɛn advanced flatbed die-cutting presss, STK dane tesa 4962 ma ɛyɛ pɛpɛɛpɛ kɛse pre-twitwa foam backings, multi-cavity perimeter frames, ne mounting dots de ma wɔ clean release liners a ɛtrɛw pull-tabs ma nsaano line adwumayɛfo ntɛmntɛm.
Tags a ɛyɛ hyew .: tesa® 4962 afã abien-afã a ɛnyɛ-acrylic teyp|a ɛkorɔn-adwumayɛ mounting & splicing ano aduru, China tesa® 4962 abien-afã a ɛnyɛ-woven acrylic tape|high-adwumayɛ mounting & splicing ano aduru ayɛfo, wɔn a wɔde ma, adwumayɛbea
